Kiss "keep It Simple Stup**" Sep 29, 2016

OK, first thing to do is to consider the space, (including walls and doors) you are trying to condition. Envision the air flow between where the air will eventually come in and where it will be exhausted once you install the ductwork. Lastly, based on the inlet and exhaust locations, figure out where you want to position the unit you are going to use. Now there are lot's of installation tips an experienced professional can offer you while going through this process, but common sense and a... more

Love The Heater May 17, 2016

Easy to order, it arrived 7 days late but once installed it works fantastic. I have a large 3 stall garage and it heats up in minutes. I would recommend this heater to friends and family.

Reznor Udap Series Aug 23, 2016

We purchased 75,000, 120,000, 150,000, and 200,000 BTU units, 28 units in total. The 83% efficient rating helped us offset the cost of the upgrade by being eligible for a rebate from our utility. All heaters were installed and work beautifully. The heaters look great! They are installed in a warehouse with great WIFI access so we controlled all 28 individual heat zones using 28 WIFI thermostats from Honeywell. Couldn't be a happier customer! Now management has control of all 28 heaters with... more

Owner, Custom Made Aug 07, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.

Warmwire Heated Floor Feb 16, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more