Fantastic! Sep 19, 2016

I am in the process of remodeling my bathroom and wanted something cleaner and sleeker than the old hydronic base boards. This heater is just the touch my bathroom needed and would look nice in any room you choose to put it in. There are female fittings on the sides and underneath so you are free to plumb how ever you wish. The heater is reversible and can be mounted with heat regulator on left or right. It is a fantastic buy with a fantastic look and i would recommend this heater to anyone... more

Warmwire Heated Floor Mar 30, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more

80 Decibel Not Acceptable Dec 12, 2016

I had this furnace installed in a manufactured home aka trailer home in the fall of 2015. It has performed well so far. My main complaint is the noise level. Considering that this type of home does not have a basement so the furnace is in the living space with you, it should have been designed to be quieter. 80 decibels is like having an alarm clock run for the duration of the cycle. It drowns out television and any conversation in the area of the furnace. Our television is at least 35... more

Great Overall Aug 20, 2016

Love this unit! Installed in the fall, it cools well yet can put out satisfyingly uncomfortable amounts of heat when it's 20F outside and throttles down very low to match demand. Thermostat is rather unintuitive to use all its features and you have only one set of temps in auto mode, but if you don't mind switching from heat mode to cool mode yourself you can program it any way you like. The indoor blower isn't obtrusive, but louder than the high fan of many ductless minisplits, even on... more

Nice Panel Radiator Nov 07, 2016

I just wish it was more simple to figure out which connectors were needed. The description should be simpler. All I wanted was 1/2" copper connections but somehow the unit showed up with PEX connections. Overall good radiator though.